Monday, 20 April 2015

Shining with an inner glow

Following on from experimenting with the glasses of coloured water I had a few small vials from a previous artwork and I thought they might work well as they were translucent and were small and might project colour in a similar way to the glasses.

So I filled them with coloured liquid and tried projecting them onto the wall. The results were...underwhelming.

There's some refraction and mixing of the light but in general nothing remarkable seems to be happening here. 

So I thought that perhaps it would work better if I reduced the distance between the vials and the screen.

That's better. Now we're getting somewhere. There's a nice sharp projection onto the wall. Problem is that when you move further away than about 3cm the image begins to go out of focus and the colours bleed into one another. Still, it might work if it was viewed from the other side of the screen so I tried projecting onto a piece of paper.

Nice! This reminded me of pixels on a screen. Maybe it was possible to draw with the vials? So I taped a few different coloured vials together to see what it looks like.

So, that's pretty unremarkable right there. What about when light passes through them onto a screen?

That wasn't really the effect I was after and besides, the "pixels" are 3 times longer than they are wide making drawing with them harder than it needs to be.

Thinking about this I wondered how they would look if they were lit from underneath with the light illuminating the shaft of the vial.

That is a nice effect. Can I combine pixels and the inner glow to create a glowing bitmap image?

I went away and found a portrait of a person. Converting that image into pixels on an approximately 20x26 grid I drilled the equivalent amount of holes in a sheet of plywood and dropped correspondingly coloured liquid into the appropriate holes.


Even unlit it still forms an image of sorts.
Trap for young players. Don't knock over your precariously propped up bit of plywood or you will have to reload everything again!

When lit it does create an image - you might be able to see who it is if you squint and use your imagination!




 I think that classes as proof of concept. I just have to refine the pixel definition which means increasing the size of the piece by at least two times - which means squaring the number of pixels.

(I also really like the way the light is shining off the edge of the plywood in the second last photo - might need to investigate that further).




No comments:

Post a Comment