Thursday, 30 April 2015

Some days it's hard work

Some days you get in the studio and everything works wonderfully. Other days, well, let's say they can be hard work.

Unfortunately, yesterday was a hard work day.

I was going back over a few observations we'd made but nothing spectacular leapt out.

Shining light through the faceted glass sides of some old coachlight fittings I'd used on another project we had previously determined that, if you rotate them they produce an effect that is almost holographic.




Shining light through the edge of a shard of plexiglass demonstrates a strong propensity for internal transmission of light. The edges and any scratches or marks on the face of the sheet light up. But I already knew that from seeing the work of other artists.


And I thought I'd test the ability of coarse nylon fishing line to catch light.
I made up a quick frame out of wire and strung the fishing line across it. I then suspended it and shone some light through it.


While it does catch the light I wouldn't describe it as a striking effect.

Finally I made up a small screen out of some baking paper and wire. This was just to see how some of the work projected from the other side might appear rather than projecting it straight onto the wall.

I have to say that this looks better. The screening of the mechanisms of projection isolate and separate the light  so that it operates as an artwork in its own right. The fact that you can also peer around the corner and discover how it works adds to the mystery and adventure of the work.

Came up with something at the end of the day but, gee, some days are hard!

Friday night drinks

This last Friday Tooth & Nail had an exhibition opening downstairs. The usual affair where people gather together, imbibe a few drinks and praise or rubbish the art as they see fit.

Since our studio is conveniently placed right next to the toilet we thought we'd set up a bit of an installation to entertain passers-by.

30 minutes of application and we came up with this:


Friday, 24 April 2015

In the mix

Today our different investigations were combined producing some very exciting and interesting results. The first three images use light reflected from CDs in a pool of water using a screen to limit the light spill accompanied by a tape reflector.

The final image was a bit of a surprise simply shining an LED torch through a jar of coloured water but across the air-water interface rather than through the water. Nice effect.





LED vs incandescent

One of the effects I've noticed is that LED light sources seem to give a crisper shadow than Incandescent light sources.

Incandescent light

LED light


I can't quite work out why this might be the case. It might be related to how the light is created by LEDs or perhaps it is polarized or something affects our perception?

Incandescent lights emit a full spectrum emmission. Electricity is passed through a (usually) tungsten filament that heats up and emits electromagnetic radiation in the visible spectrum.

LED lights, on the other hand, release light via electroluminescence where a photon of light is released. The colour of the light depends on the energy of the photon. Consequently LEDs emit light within a specific part of the electromagnetic spectrum.

A comparison between the spectra from various sources shows that incandescent light is strongly skewed towards the red end of the spectrum while (white) LED light has a peak in the blue spectrum and a peak in the green spectrum tailing off into the red. This pattern more closely resembles the spectrum of daylight.


There are also several ways that LEDs are combined to produce white light.
Phosphor Conversion uses a blue gallium nitride diode to excite a yellow emitting phosphor coating. This produces a mix of blue and yellow light that mixes to create white. This method is the most common and is likely the type of lighting used in the LEDs we have to hand.
Othe methods include Colour Mixed LEDs where the proper amount of light from Red, Green and Blue (RGB) LEDs yields white light.
A third method is a hybrid that uses both a phosphor coating and discrete monochromatic LEDs.

Apparently the level of blue light in the LED spectrum causes the pupil opening of the eye to become smaller and increase visual acuity. So, maybe just using the blue-ish LED lights makes the shadow appear sharper - except that it is captured on film! A camera doesn't have a pupil to dilate so that can't be the source.

I initially thought that the light may be polarized but passing a polarizing filter over LED light appears to reduce the glare of an LED light it suggests that the light is unpolarized to begin with. 

This suggests to me that it may be something to do with wavelength. Blue light is radiated at a wavelength of 450-495nm whereas yellow light is emmitted at 570-590nm. This goes back to a previous post regarding single-slit diffraction.

The single-slit experiment was developed based on the observation that light diffracts around the edges of objects. Blue light will diffract less than red light  because the wavelength is shorter. Longer wavelengths are redirected more strongly than shorter wavelengths.

At least that's the argument I'm going with - it's based on Huygens Principle but that is a mathematical model of reality and there are competing models such as Quantum Theory that may also explain it. A simple question gets very deep and philosophical very quickly.

For my purposes LEDs make sharper shadows! 

Tuesday, 21 April 2015

Water bath

One thing I have always loved is the way light reflects from the surface of the water and creates rippling light effects on other objects. I've been wanting to recreate this so I grabbed one of the paint trays we used to roll paint on the walls, filled it with water and started pointing light at it.



As you can see it creates a reflection off the surface of the water. When the tub is agitated the ripples move around and create swirling patterns. But the surface wasn't very reflective so I added a mirror below the surface.


This didn't really change much but did produce a dual layer effect. You can see the sharp cigar-shaped reflection of the mirror on the screen that floats separately from the reflections from the water's surface. Agitation of the water disrupts this reflection.


I wondered whether adding colouring to the water would colour the reflection.


It did but unexpectedly only where light became focussed. You can see the blue dots in the image below.


As I was messing around with the mirror trying to create different effects, the most unusual thing emerged...

Given the right angle a half submerged mirror causes light to be directly reflected from the unsubmerged section but the submerged section reflects and refracts the light causing it to separate into its constituent colours and reflecting at a different angle.


Even more unexpected things occurred because I am by nature rather lazy and tend to leave things lying around cluttering up the studio. The tape that was still stuck to the wall caught the light and there was a double effect of the distorted reflection from the submerged mirror floating in space!




Sticky Tape!

John and I were discussing the transmissive properties of different media (specifically plexiglass) and it got me wondering if nylon fishing line would behave in a similar manner transferring the light down the filament. I wasn't too certain about this because why would they have invented optic fibre if nylon could do the trick?

Anyway, I had some thick nylon fishing line that I use for hanging exhibitions and thought I'd try shining the light down it's end.

It worked - for about 5cm....then the light faded down the length. Very unimpressive.

JB however had another take on it and suggested illuminating it from the side. The shorter distance seemed to allow the light to irradiate the whole reel so that it glowed. We even tried using the Jar-of-coloured-water-filter to try and impart some colour to the glow.


We then looked around for other plastics to shine light through and settled on the sticky tape dispenser I had used to put together my vials of coloured water.


To our surprise it worked quite well.

OK, well if tape on a reel works, what about just a ball of tape?


That looks pretty amazing doesn't it! Except that in real life it looks like a ball of tape with some light shining through it. Still, it does suggest that we could get some good visual effects through illuminating plastics and recording the results via video or photograph for display.

What about a single strand of plain tape? We strung a strand of tape onto the wall and started shining light at it.



It is interesting and catches the light in mid-air which is an interesting effect. But when we shone light through it a strange pattern appeared. The distribution of glue on the tape was highlighted and created a wonderful shadow on the wall.



Monday, 20 April 2015

The raw material

I've been messing about with coloured liquids in glasses but what about the glass itself?

Glass reflects and refracts light. What if I arrange some glasses and play light upon and through them?


That creates some interesting effects but I can't help thinking that I need to screen off some  of the light. Maybe using a moving ray of light will create some interesting dynamic effects?


Meanwhile...

I've been fiddling around with light passing through coloured media. John and I are sometimes in the studio at the same time and we've tested a few different things out with these:





Meanwhile, when I'm not around, John has been investigating what happens when you bounce light off CDs. The microscopic ridges of a CD act as a diffraction grating and cast a rainbow when light is reflected from their surface. John's been investigating how he can combine these together with small LEDs to create interesting rainbow effects.



Some of these images are at quite a small scale (15cm)



But others are working their way up to larger installations.




And it is at this point that the first signs of collaboration and cross-fertilisation of ideas occurs!! In the above images John found that there was too much white light spilling over into the projection so he used one of the coloured water jars that we'd been playing with earlier to colourize the white patches.



Applying this technique to the full spectrum:







Now that is interesting stuff!

Shining with an inner glow

Following on from experimenting with the glasses of coloured water I had a few small vials from a previous artwork and I thought they might work well as they were translucent and were small and might project colour in a similar way to the glasses.

So I filled them with coloured liquid and tried projecting them onto the wall. The results were...underwhelming.

There's some refraction and mixing of the light but in general nothing remarkable seems to be happening here. 

So I thought that perhaps it would work better if I reduced the distance between the vials and the screen.

That's better. Now we're getting somewhere. There's a nice sharp projection onto the wall. Problem is that when you move further away than about 3cm the image begins to go out of focus and the colours bleed into one another. Still, it might work if it was viewed from the other side of the screen so I tried projecting onto a piece of paper.

Nice! This reminded me of pixels on a screen. Maybe it was possible to draw with the vials? So I taped a few different coloured vials together to see what it looks like.

So, that's pretty unremarkable right there. What about when light passes through them onto a screen?

That wasn't really the effect I was after and besides, the "pixels" are 3 times longer than they are wide making drawing with them harder than it needs to be.

Thinking about this I wondered how they would look if they were lit from underneath with the light illuminating the shaft of the vial.

That is a nice effect. Can I combine pixels and the inner glow to create a glowing bitmap image?

I went away and found a portrait of a person. Converting that image into pixels on an approximately 20x26 grid I drilled the equivalent amount of holes in a sheet of plywood and dropped correspondingly coloured liquid into the appropriate holes.


Even unlit it still forms an image of sorts.
Trap for young players. Don't knock over your precariously propped up bit of plywood or you will have to reload everything again!

When lit it does create an image - you might be able to see who it is if you squint and use your imagination!




 I think that classes as proof of concept. I just have to refine the pixel definition which means increasing the size of the piece by at least two times - which means squaring the number of pixels.

(I also really like the way the light is shining off the edge of the plywood in the second last photo - might need to investigate that further).