Thursday, 21 May 2015

Guess who's coming to dinner?

I've been toying with the idea of using a dining table setting to project onto a screen. To that end I went out and purchased a cheapo cutlery set from Kmart for $4. At that price you know it was made with slave labour! I have blood on my hands!!

Anyway. I set up each element of the cutlery set to see what effects they would produce.

Knives produce long skinny projections


Spoons (concave up) produce a broad umbrella shape


Spoons (Convex up) actually scatter the light quite widely and leave only a small spot of reflected light.


And forks have a similar effect to knives (the handles) but with a multi-pronged approach!


When assembled as a dinner service the effect is not that striking. Most of the exciting projections in this image are from the mirror and glass. There are some scattered patterns around the mirror but nothing remarkable.


Turning the setup around and applying some oil on water in the lid of an ice cream container again produces nothing very surprising. Although the glass on the side has an interesting spindle shape.


Investigating the glass of water further shows that with the glass filled to ~1cm from the brim and the light at an angle of ~45 degreesI can recreate the spindles. These roll around when the glass is bumped. Note they are driven by reflections as in the picture below there is no red in the spindle from the dyed water.



There were some promising features from the cutlery so I retried them placed adjacent to the wall in orderly arrangements.







These are good. I like these. Especially the forks.

And for good measure I just dumped all the cutlery in a pile. This is my favourite! I think that may be a work right there.



Silhouette

Drawing on my experience with shadow puppets I wanted to see if I could create screens or silhouettes that could be projected. I simply cut out a pattern from some black contact and stuck it to a sheet of polycarbonate.

Again the type of light really impacts the outcome. Single high powered LEDs create sharp shadows with high contrast. The big ol' yellow spotlight creates a fuzzy ball!

LED

To give it a bit of colour I placed the oil jar from a previous experiment in front. The silhouette still projects through the colour but the jar acts as a lens stretching the image laterally. By moving the jar you can stretch the image wider.



Smash it up!

Previously, John had smashed a mirror to get hold of some smaller reflective pieces. Now, I call myself a sceptic, but for some reason I still can't bring myself to smash a mirror despite knowing that it is fundamentally no different to  smashing glass! Guess that "Seven years bad luck" thing is pretty deeply ingrained. Never expected to learn that about myself!

Anyway thought I'd make use of some of the bits to set up some projections. I also thought about using semi-transparent reflectors after watching light fall through a cafe window the other week. Being semi-transparent there was both a reflection and transmission of light which will give me something to play with.



Drip, drip, drip...

One of the things I want to do is create movement in these works. It's all very well having a static set up but as some of the videos in previous posts show, movement really adds an extra level. One way to add movement to the reflections from water is to add a drip.

I set up the following with a sheet of alfoil that had been laminated. It has a nice projection. When I poured water down the laminated sheet I noted that the reflection off the sheet - kind of like a waterwall - was actually not very remarkable. The ripples the water made in the bowl, however, were great.



Monday, 18 May 2015

A bowl of water

One of the things I've been looking forward to trying is generating ripples in water and shining a light from underneath to see what ripple patterns I can make. So, I bought a fairly broad and deep glass bowl to investigate.

Being alone in the studio I didn't have anyone on hand to hold the bowl, the light and take a photo at the same time so I steadied the bowl against the wall and produced some surprising effects.



Adding a little hand shaking produces ripples that create lovely patterns.


Working out that I could prop the bowl up on a couple of vegemite jars I was able to free my hands to take some good photos. The problem is that I can't cast the light directly onto the ceiling because the ceiling is covered with a wooden veneer and you can't make out the details and, of course, water levels out to be perpendicular (horizontal) to the direction of gravity(up and down), so I can't tilt the bowl to get the same effect. Still, I do like the results.






Throwing some table tennis balls into the mix causes little black balls to float across the image. 



Filter the light with a little colour and voila!




Slots



Slots! After experimenting a bit with these I thought the light emanating from a couple of slots needed further investigation. I cut a pair of slots in a piece of cardboard and started shining different lights onto them.


The first example is using an LED torch with 5 LEDs and no diffuser lens. It results in a banded appearance of the light from each slot. I am presuming that the 5 lights interfere with one another's phase and cancel each other out in places.

When a single high-powered LED is used single slots appear.



When the rope light is used there are multiple light sources and hence you get multiple coloured lines projected.


When the spotlight (which has a broad diffusing lens) is used the vertical lines disappear altogether creating an interesting effect.


Using multiple slots


The 5 LED Torch still produces banded lines.


The high powered LED produces intense lines with some flare around the edges. I attribute these to the concentrating lens mounted on this LED.


The rope light produces an array of different coloured lines.

The spotlight produced some interesting results when cast obliquely onto the side wall.


When the slots are moved laterally interesting effects ensue!





Applying some screening to cut out the extraneous light from the spotlight produced some interesting results.



Finally, when a little extra colour is applied some nice results emerge.





Friday, 15 May 2015

Oils ain't oils!

I started the day off just lighting up a corner of the studio testing out the effect of different types of light. Seems single high-powered LEDs produce a sharper, more intense colour than a big old yellow spotlight.



LED


Spotlight


Then I set about looking at the properties of different types of fluids. 

First up was methylated spirits.
Now I didn't really give too much consideration to this and leapt into it but on reflection I should have recalled my high school chemistry a bit better. Methanol, being an alcohol, is soluble in water - otherwise how could I drink the alcohol in my beer? As such the food colouring actively colours the methanol - which could prove useful if I want to display glass jars of coloured liquid that won't grow algae!



Vegetable oil, on the other hand, is immiscible in water. The oil floats on top of the water and the food colouring won't dye the oil.



What this means is that I can produce horizontal layers of colour using oil. (Sure, I could just use coloured plastic but where's the fun in that?)

This gives a new aspect to play with:

Using a bit of wire John was playing with to cast a shadow





Or adding horizontal lines to my previous experiment: